Latest Citrix Certification Exams

Exam Name: Implementing Citrix XenServer Enterprise Edition 5.0
Exam Type: Citrix
Exam Code: 1Y0-A09 Total Questions: 77

Question: 1
Scenario: During the creation of a Microsoft Windows 2003 Standard Edition server virtual machine (VM), an administrator is asked to make as many processors available as possible to allow a developer to test a new multi-cpu application. What is the maximum number of VCPUs
that an administrator can assign to this VM?

A. 2
B. 4
C. 8
D. 16
Answer: B Question: 2
According to best practices, which step should an administrator perform before booting the installer CD to upgrade to XenServer Enterprise Edition 5.0 from XenServer 4.x?

A. Suspend any running virtual machines
B. Delete the current server configuration
C. Re-enter the physical network configuration
D. Backup the existing virtual machines (VMs) with a VM export
Answer: D Question: 3
Which two physical hardware configurations are supported by XenServer Enterprise Edition 5.0?
(Choose two.)

A. 512GB RAM B. 256GB RAM C. 32 CPU cores
D. 128 CPU cores
E. 32-bit architecture
F. 64-bit architecture
Answer: C, F Question: 4
To allow for rapid deployment of XenServer hosts in a large environment, an administrator
decides to install XenServer Enterprise Edition 5.0 using a network boot process. To which type
of server must the administrator configure DHCP to communicate?

A. FTP B. HTTP C. TFTP
D. HTTPS
Answer: C Question: 5
Where can an administrator determine when a XenServer Enterprise Edition 5.0 license will expire?

A. XenCenter
B. XenServer Tools

Page 1 of 22

Exam Name: Implementing Citrix XenServer Enterprise Edition 5.0
Exam Type: Citrix
Exam Code: 1Y0-A09 Total Questions: 77

C. mycitrix.com web site
D. Citrix License Management Console
Answer: A Question: 6
Scenario: An administrator is installing XenServer Enterprise Edition 5.0 in an environment. The administrator has two disks available for storage. According to best practices, how should the
administrator configure the local disk storage repositories (SRs) during the initial XenServer installation?

A. Install XenServer on one disk and the control domain on the other disk
B. Install XenServer on one disk and the virtual machine SR on the other disk
C. Install XenServer and an in-place upgrade partition on one disk and the control domain on the other disk
D. Install XenServer and the virtual machine SR on one disk and an in-place upgrade partition on the other disk
Answer: B Question: 7
How much disk space is required for the control domain and guest VM storage repository in a
XenServer Enterprise Edition 5.0 installation?

A. 4 GB B. 8 GB C. 16 GB D. 32 GB
Answer: C Question: 8
Scenario: An organization has a single installation of XenServer Enterprise Edition 4.0. The administrator plans to upgrade the host to version 5.0. Which upgrade path should the
administrator take?

A. Upgrade the XenServer using Emergency Mode
B. Upgrade directly from version 4.0 to version 5.0
C. Upgrade to version 4.1 and then upgrade to version 5.0
D. Upgrade XenCenter to 5.0 and use the Updates Manager
Answer: C Question: 9
Scenario: A company has acquired two small businesses recently. The administrator for the company needs to create a template of a virtual machine (VM) that has Microsoft Exchange
running on Microsoft Windows Server 2003. The template will be used to create two more VMs to accommodate the recent business expansion. In which way should the administrator create the
template?

A. Take a regular snapshot of the VM
B. Create a template using an ISO image
C. Create a template VM using a Windows Server 2003 Install CD
D. Take an existing clean Windows Server 2003 VM and turn it into a template

Page 2 of 22

Exam Name: Implementing Citrix XenServer Enterprise Edition 5.0
Exam Type: Citrix
Exam Code: 1Y0-A09 Total Questions: 77

Answer: D

Question: 10
Which two steps must an administrator take to create a Microsoft Windows virtual machine using the XenConvert Physical to Virtual (P2V) conversion tool? (Choose two.)

A. Modify device drivers
B. Reboot the physical machine
C. Run XenConvert on the physical Windows machine
D. Import the template or image into the XenServer host
Answer: C, D Question: 11
An administrator created a template of a Microsoft Windows XP SP3 virtual machine (VM) and now needs to modify it. How can the administrator modify the template?

A. Power on the VM template, make the changes and save the template
B. Export the template from the XenServer host, import it to another system, power it on and make the changes
C. Put the XenServer host in Maintenance Mode, make the changes to the VM template and then exit Maintenance Mode
D. Create a new VM based on the original template, make the changes to the new VM and turn the new VM into the new template
Answer: D Question: 12
What are two best practices for cleaning up a virtual machine after completing a Physical to
Virtual (P2V) migration using XenConvert? (Choose two.)

A. Install XenServer Tools
B. Delete any local user accounts on the machine that are not in use
C. Remove and reinstall applications such as antivirus and anti-spyware
D. Remove any hardware related software such as management utilities and unused drivers
Answer: A, D Question: 13
In which three locations could an administrator go within XenCenter to create a new virtual machine? (Choose three.)

A. VM menu
B. Tools menu
C. New VM button
D. Templates menu
E. Add New Server button
Answer: A, C, D Question: 14
What are two differences between a Microsoft Windows virtual machine (VM) installation of the
XenServer Tools and a Linux VM installation of the XenServer Tools? (Choose two.)

A. The XenServer Tools are pre-installed on a Windows VM but NOT on a Linux VM

Page 3 of 22

Exam Name: Implementing Citrix XenServer Enterprise Edition 5.0
Exam Type: Citrix
Exam Code: 1Y0-A09 Total Questions: 77

B. The XenServer Tools CD is automatically detected on a Windows VM but must be mounted on
a Linux VM
C. The XenServer Tools do NOT need to be installed on a Linux VM but do need to be installed on a Windows VM
D. The XenServer Tools are installed on a Linux VM using the command line interface (CLI) but installed on a Windows VM using the GUI installer
Answer: B, D Question: 15
Scenario: An administrator wants to create a new virtual machine (VM) on XenServer1, which
does NOT reside in the current resource pool. The administrator wants to keep the configurations exactly the same as those in the resource pool but does NOT want to manually configure the new VM. How can the administrator create the new VM with the same configurations as those in the resource pool?

A. Copy the VM to a shared storage location and export it to XenServer1
B. Convert the resource pool VM to a template and start it on XenServer1
C. Make a backup of the desired VM configurations and save it to a shared storage location before exporting it to XenServer1
D. Create a custom template of the resource pool VM and import it to XenServer1 then create a new VM from the template on XenServer1
Answer: D Question: 16
An administrator must ____ __ on the virtual machines to return performance data to
XenCenter. (Choose the correct phrase to complete the sentence.)

A. Enable logging
B. Set the system alerts
C. Install XenServer Tools
D. Configure the management interfaces
Answer: C Question: 17
Scenario: An administrator is adding a new XenServer host to a pool and wants to ensure server management connectivity. To do so, the administrator creates a new NIC bond using XenCenter.
However, after completing the task, the administrator is unable to join the server to a pool. Which step must the administrator take before the XenServer can join the pool?

A. Configure a new network to make the bond available
B. Shut down the virtual machines that use the NIC bond
C. Reconfigure the management interface for the new XenServer host and move it back on to a physical NIC
D. Add the IP information for the pool to the new XenServer host and reconnect the virtual network interface to the network
Answer: C Question: 18
Which three performance data points can an administrator locate for a virtual machine in the
Performance tab in XenCenter? (Choose three.)

Page 4 of 22

Exam Name: Implementing Citrix XenServer Enterprise Edition 5.0
Exam Type: Citrix
Exam Code: 1Y0-A09 Total Questions: 77

A. CPU usage
B. Memory usage
C. Disk and network I/O D. High availability status
E. VCPU resources allocated
Answer: A, B, C Question: 19
In which scenario should an administrator choose to suspend a virtual machine (VM)?

A. Orderly shutdown of the operating system on the VM is needed
B. Memory and CPU cycles on the XenServer host need to be freed up
C. The administrator wants to store the memory image on the virtual disk of the VM
D. The administrator needs to restart the VM on the same XenServer host each time the VM is started
Answer: B Question: 20
Which two tasks can an administrator perform using the Storage tab in XenCenter? (Choose two.)

A. Create a VM or ISO Storage tag
B. Format an NFS share using NTFS
C. Attach an NFS share to a host or pool
D. Configure a custom NetApp storage repository
Answer: C, D Question: 21
An administrator is in the process of disabling a XenServer host that is part of a resource pool and migrating its virtual machines (VMs) to another XenServer host in a pool. What does the
administrator need to do to accomplish this?

A. Run the host-evacuate command
B. Upload an update to each server or pool
C. Start a support service on the XenServer host
D. Place the XenServer host into Maintenance Mode
Answer: D Question: 22
Which action must an administrator take to create an internal-only network in a XenServer environment?

A. Add a new network
B. Set up a VLAN using an existing NIC
C. Select network 0 in the Network Properties
D. Ensure that at least two NICs are configured as a bond

Answer: A Question: 23

Page 5 of 22

Exam Name: Implementing Citrix XenServer Enterprise Edition 5.0
Exam Type: Citrix
Exam Code: 1Y0-A09 Total Questions: 77

Scenario: An administrator is configuring a Microsoft Windows virtual machine (VM) that has
XenServer Tools installed. While configuring the VM, the administrator is asked to set a bandwidth limit of 100Mbps on the virtual NIC. How can the administrator set this limit?

A. Edit the Optimization tab of the VM
B. Edit the properties of the virtual NIC from the VM C. Create a new MAC address using Auto-generate
D. Select Network 0 as the appropriate network for the VM
Answer: B Question: 24
Which three tasks can be performed using the tabs in XenCenter? (Choose three.)

A. Recover an unreachable host
B. Manage VMs on shared storage
C. Enable high availability on a pool
D. Back up host configurations and software
E. Remove a XenServer host from a resource pool
Answer: B, C, E Question: 25
Which three steps must an administrator take to dedicate a separate bonded interface to storage traffic? (Choose three.)

A. Assign an IP address to the interface
B. Disable multipathing for all storage traffic
C. Dedicate the IP address to remote storage traffic
D. Set the interface or NIC bond to Management Mode
E. Direct all storage traffic to the primary management interface
Answer: A, C, D Question: 26
Which two steps does an administrator need to complete in order to disconnect a storage repository (SR) without losing any data? (Choose two.)

A. Shut down any virtual machines that are using the SR B. Click Detach Storage Repository in the Storage menu
C. Disconnect from the network all virtual machines that are using the SR D. Click Forget Storage Repository on the Resources pane shortcut

Using PassGuide online virtual Citrix practice engine, easy to know well Citrix Training knowledge and pass the Citrix certification exams http://www.passguide.com/Citrix.html

Related posts:

1. PassGuide citrix 1y0-a09 braindumps Question: 58 An administrator wants to take several virtual machines...
2. PassGuide 1y0-a09 practice test exam Question: 31 What must an administrator configure on the pool...
3. PassGuide 1y0-a08 dumps Question: 82 Scenario: An administrator implements a new Web Interface...
4. 1y0-a14 practice test 57. An administrator installed the target device software on the...
5. PassGuide 1y0-a08 practice test questions 1 Citrix 1Y0-A08 Advanced Administration for Citrix XenApp 5.0 for Windows...
6. [offer] Virtualization with Xen™: Including Xenenterprise, Xenserver [offer] Virtualization with Xen™: Including Xenenterprise, Xenserver Syngress.Virtualization.with.Xen.May.2007.eBook-BBL TITLE :...
7. testinside Citrix Other Certification 1Y0-308 Citrix Access Gateway 4.5 Advanced Edition: Administration : 1Y0-308 Exam...